Roof Membrane
Colbond Inc. introduces EnkaRetain and Drain, a sustainable roof product that absorbs and retains water so plant roots have a continuous source of moisture while allowing excess water to filter through and drain.
Read moreMedical Equipment – General
Metal Roof System
Liberty Building Systems has acquired exclusive rights to manufacture and market the Snap-It architectural standing seam metal roof system. The product is a 16-inch wide roof and fascia panel system whose edges snap together to form 1-inch high seams without requiring a mechanical seaming device. The roof system requires a 3:12 inch pitch and 5/8 inch wood or 22-gauge metal deck with a weatherproofing underlayment.
The company will supply panels in lengths from 3 feet up to 45 feet long and in 26-gauge fluted or 24-gauge fluted or flat facings.
Read moreROOFTOP EQUIPMENT BASE
ThyCurb offers new, laser-cut custom bases for rooftop equipment. The manufacturer uses advanced laser technology to create secure rooftop mounting to precise specifications, offering the tightest tolerances. Each base is custom-built due to the varying specifications of rooftop units and roof configurations, but the company usually delivers the base within two weeks after receipt of an order.
Options include a built-in roof pitch, extra height for installation of sound traps beneath the unit, and a pressure-treated wood nailer. The bases arrive in one piece, if trucking permits.
Read moreRoof Mounting Supports
Roof installation of HVAC units is made easier with equipment mounting supports from Thybar. The supports have a high load-bearing capacity provided by a system of internal bulkheads welded into position at specific intervals along the length of the rails. Standard construction on the three types offered includes welded 18 Ga. Galvanized steel shell; base plate and counter-flashing; factory-installed wood nailer; fully mitred end sections (two models); and internal bulkhead reinforcement.
Read moreModified Bitumen Roofing System
Republic Powdered Metals Inc., a developer and manufacturer of coatings and membrane for roofs and walls, adds the Permaroof modified bitumen system to its product line. The new line’s membranes, base sheets and ply sheets are available in hot asphalt, cold adhesive, or self-stick assemblies. The membranes are fiberglass or polyester reinforced, providing added strength and tear resistance. UL classification provides a specific level of fire protection. No hot adhesives or torches are required for application, making the application safe and clean.
Read moreTranslucent Roofing System
Centerpoint’s new translucent roofing system is formed from GE’s Lexan Thermoclear multi-wall polycarbonate) sheet, a virtually unbreakable material that provides full-spectrum, natural light and improved energy efficiency. The roofing structure is designed to allow penetration of natural, filtered daylight into living areas without the energy loss and higher heating and cooling costs of glass roofing inserts. The company says the pre-assembled system can withstand wind loads of up to 140 mph; has superior UV resistance and impact strength, and exceptional sound-dampening qualities.
Read more